Skip to main content

New V2 Auto top up from TMC

After needing an auto top up unit for some time, with quite high costs for a unit that function seems very minimal. I have always been put off until now. Whilst reading ultra marine I saw a review and advertisements for the TMC V2 auto top up and more surprising is it's very affordable price tag. After further investigation it seems to have really good reviews on forums and blogs. I have to say it is a real good, easy to set up and cheap unit that functions perfectly. This should give me more stability and time to enjoy the aquarium.I will in a few weeks report back any improvements that it will hopefully make.

Comments

Anonymous said…
whoah this blog is wonderful i like studying your articles.

Stay up the great work! You understand, many persons are
searching round for this info, you can help them greatly.
my site :: formal gowns
Gareth said…
Many thanks for your kind comments
Anonymous said…
Really whеn someone doesn't know afterward its up to other people that they will help, so here it happens.
Feel free to visit my web page : url shortner
Anonymous said…
Keep on working, great job!
Look at my blog : binary options forex
Anonymous said…
We are a grоup of volunteers and stагting a new schеme in оur community.
Your ωeb sitе offereԁ us ωith ѵаluаble information to woгκ on.
You've done an impressive job and our whole community will be thankful to you.
My page: best pest control
Unknown said…
Very impressive blog. Thanks for this wonderful post.
water treatment chemicals

Popular posts from this blog

Vauxhall vivaro movano heater blower motor not working. How to fix, repair

So it’s a cold winters morning your frozen to the bone, you jump into your vauxhall vivaro and turn the heaters on, it doesn’t work. In this article I will explain how to repair. There are commonly three things that can go wrong and it true to be said with most vehicles. These are the fuse, the motor, and or the heater resister. These should be checked in this order. Not only to keep costs down but is a good methodical way to solve the problem. A little contradictory but before you do anything just check if the motor works on any speeds at all. If it does, particularly the fastest speed. It safe to say the fuse and motor are working fine, and would probably mean that heater resister if faulty. If this doesn’t do anything you should grab the owners manual and locate the fuse. This can be checked visually by removing and looking at the fuse element or the use of a power probe and checking a power at both sides of the element. If the heater still doesn’t work, remove the motor a

TDS and how to get it to zero.

Total dissolved solids, or TDS as it is otherwise known can be the cause of many problems. One of the main problems that it can cause, is nuisance algae like i have had. As you will know from following my blog, i have had major issues with Algae. The RO water with a TDS reading of 9 that was being used woud'nt have helped. So how do you overcome this? Get yourself an in line TDS meter to establish your TDS reading. This meter measures the water before the Reverse Osmosis and pre filter stages. It is not unusual for tap water to have a reading of 300. These meters also indicate the reading after the reverse osmosis process. As expected this should be zero. If like me you have a TDS reading above 0. You will be feeding the nuisance algae. Provided your TDS is quite low, for example around 10 you can be satisfied that your Membrane is in satisfactory working order. If higher or your RO membrane is a few years old you might want to consider membrane replacement. So your pre